A new arrival in the family: the Harley Benton SC-550
Les Paul curves, Tobacco finish and a fresh Thomann box: no doubt about it, a Harley Benton SC-550 has appeared in my guitar rack, so here’s a quick tour to give you my humble opinion.
I think it’ll be useful for many potential buyers to talk a bit about this axe, because you can read a lot of things about it, and it all deserves a little clarification.
Enough talk, let’s get on with this Harley Benton SC-550 review.
The specs
Here’s the description on the Thomann website:
- Flame Deluxe Series
- Mahogany body
- Carved AAAA flamed maple top
- Set mahogany neck
- Neck profile: 60s
- Roseacer fretboard
- Fretboard radius: 350 mm
- Pearloid trapezoid inlays
- 22 frets
- Scale length: 628 mm
- Nut width: 43 mm
- Bone nut
- 2 Roswell LAF Alnico-5 humbuckers
- 2 volume controls
- 2 tone controls
- 3-way selector switch
- Chrome DLX hardware
- DLX Tune-o-matic bridge
- DLX Wilkinson tuners
- D’Addario EXL strings 010 – 046
- Color: Faded Tobacco
Tempting, isn’t it?
In practice, the bone nut leaves me skeptical, and I’m not sure it’s made of anything other than good old plastic. Same goes for the flamed maple top. Even though it’ll be hard to verify, I very much doubt we’re dealing with luxury wood.
The neck is supposedly mahogany, and as for the fretboard, it’s neither rosewood nor ebony but Roseacer, which is apparently heat-treated maple. The tuners are vintage-style Wilkinsons, but it’s impossible to find any more information on the DLX designation.
As for the rest, I didn’t know Roswell pickups, but since they’re Alnico 5, I assume they’re fairly vintage-voiced and the output can’t be huge. But let’s save that for later.
What about playability?
A quick note before going further: unfortunately I haven’t had the chance to try many genuine Les Pauls in my guitar-playing life, so my opinion will mostly cover the guitar’s intrinsic playability.
Good marks for ergonomics: the guitar is well balanced and sits nicely against the body. It isn’t too heavy, and I already know it’ll go unnoticed during rehearsals and gigs.
As for the fretwork and fret leveling, it’s clearly not on the level of what a luthier could do. I’m disappointed that the strings are a bit high and that there’s some buzzing past the 12th fret on the high strings. Another small disappointment is the finish of the fret ends, which on this SC-550 isn’t as pleasant as on the CST-24 (reviewed here).
Nevertheless, these few reservations aside and keeping the price in mind, it has to be said that this Harley Benton is once again very pleasant to play. The neck isn’t a baseball bat and is a pleasure to play. Of course it’s not a US Fender or a good Ibanez, let alone an original Les Paul, but Bonamassa-style licks come out very well and you quickly feel at home on this guitar.

Good marks for the tuners: they’re precise and the guitar doesn’t suffer from untimely detuning.

What about the sound?
As I said earlier, these pickups were completely unknown to me, and it’s hard to find any information on the pedigree of these Roswell pickups.

To me they’re a bit dark but have a nice bite. They’re not the most defined either, but they have a very pleasant vintage touch, both clean and distorted. In any case I’m happy with the sound, which to me is close to what a Les Paul should sound like. Just keep in mind that this guitar isn’t cut out for metal, and blues/rock will remain its home turf.
The question of swapping the pickups may come up, but I wonder whether it’s wise to invest almost the price of the guitar in a pair of Seymour Duncan or Gibson pickups. Actually, I think changing the speaker or buying a small tube amp head will do much more to help this guitar show what it’s got. Especially since the pickups aren’t bad in themselves.
Finish / Build
Let it be said: the guitar is well finished. The binding isn’t perfect, but I’ve seen much worse, notably on a Custom77 CS3. The paint and finish are of better quality than on the CST-24.

On the electronics side, the soldering isn’t very pretty, and neither the pots nor the wires scream made-in-USA quality, but overall it inspires more confidence than what I’ve seen on, say, an Epiphone Les Paul Standard Plus.
Another drawback: no push-pull for a few more sounds; the CST-24 also does better on this point.
On the plus side, no crackling to report and the pots work without any problems.

Verdict
With the SC-550 we get a typical example of Harley Benton’s current production. That is, in my opinion, a very good guitar for beginners and a good guitar for more experienced guitarists who want to explore new playing styles and sounds. In any case, this Les Paul-alike is very much in the spirit of the original.
And since I have to choose, I’d take this Harley Benton over an Epiphone or a Custom77 CS3, for example, because I think the SC-550 gives you more for your money thanks to its nice pickups, Wilkinson tuners and hardware, and really very decent playability. In short, I don’t think you can be disappointed with this purchase. In any case, I have no desire to part with it after these few days in its company.
Pros:
- the hardware
- Playability
- the sound
- the price
Cons:
- the electronics could use more care
- the fret leveling and string height could be better out of the box
- the finish isn’t as good as the CST-24’s, except for the paint and lacquer (no push-pull / less well-finished frets)
The guitar is available at Thomann for around €250, but if your budget allows, take a look at Tokai (Love Rock).
https://www.youtube.com/watch?v=eqtMh0UZJJg&feature=youtu.be
Enjoy playing, everyone!

Leave a Reply
You must be logged in to post a comment.