Looking for a bass DI box that won’t bankrupt you?
Behringer pedals are cheap and don’t inspire confidence, we agree. But you have to admit they can be useful in countless situations, as long as you’re not too fussy about the finish and aren’t chasing some aesthete/hipster tone at all costs.
So if, like me, you use your computer to compose, practice or record, or you play in a band plugged straight into a mixing desk, chances are you’ve gone looking for a DI (Direct Input) box to plug in your instrument at some point. Well, good news: I’m going to break the subject down for you, because Thomann sells a DI pedal that seems to fit the bill perfectly. This little gem is the cheapest active DI on the site. It’s pretty, it smells nice, it’s called the Behringer BDI21, and guess what, I have one right here. So let’s get on with the Behringer V-Tone Bass BDI21 review!

A quick tour: the connections
The BDI21 has a bass input, which is handy since it’s a pedal made for that instrument, a jack output, and a balanced output that lets you plug straight into a mixing desk or an audio interface without an instrument input. That’s all the Behringer BDI21 offers, but it’s plenty for what it’s meant for: adding a bit of gain and EQ to drive an amp, or plugging into the line input of a mixing desk or, like me, an audio interface.

Let’s talk about the finish
You want luxury pots, gold plating and a pass-through switch? Well, then we have a small problem with this pedal, because it doesn’t exactly scream high-end. The knobs are small and hard to turn, and the plastic casing doesn’t bode well. However, the base is metal, which makes the pedal stable enough to use with your foot. And although the knobs are hard to turn, the pots are smooth and silent, and they have the good taste of being stiff enough to stay where you set them.
What about the effects?
The Behringer BDI21 has a preamp level control very aptly named drive, two EQ knobs (bass and treble), a presence knob, a blend to dial in more or less effect, and a volume knob.
On the downside, the EQ and presence knobs aren’t models of effectiveness, as it’s sometimes hard to hear any real change when you turn them. On the upside, the preamp does its job well and can even deliver some crunch or light distortion if you push its knob all the way to the right.
Verdict
Let’s set the scene right away: I was able to compare this pedal with an MXR M80 a friend lent me, and I have to admit the MXR outperforms the Behringer in almost every respect. The MXR has a bigger sound, the gain is better handled, not to mention the quality of the EQ… I got very good results plugged straight into my audio interface with an amp sim plugin. It’s a really endearing professional product that I’d keep if I could. Yes, I said if I could, because that pedal costs around €200, while you’ll only need to spend €20 to get the Sino-German pedal. “So what’s the point of this pedal, then?” asks the baffled reader. Well, the ability to have a DI pedal with a clean sound to plug straight into a mixing desk or, as mentioned at the start of the article, into an audio interface without an instrument input. For these uses, I think the BDI21 will serve you well and is easily worth its few euros.
Note also that I didn’t find any noticeable difference in noise between the Behringer and the MXR. On that front, both pedals came out with flying colors, delivering a sound free of interference.
The BDI21 in a nutshell
Pros:
- the price
- the parallel output for plugging into a mixing desk or audio interface
- stability (the weight)
- the clean sound
- the price
Cons:
- the knobs are too small
- the footswitch isn’t pass-through
- the sound lacks personality
- the EQ and presence knobs aren’t very effective
- a narrower sound than a high-end pedal
A short video to give you an idea of the result:

Leave a Reply
You must be logged in to post a comment.